- Other Mining Machinery[4]
- Loaders[2]
- Excavators[1]
- Cranes[3]
- Concrete Mixers[1]
- Concrete Batching Plant[1]
- Vibrating Screen[1]
- Crusher[2]
- Drilling Rig[1]
- Conveyors[2]
- AC Motor[3]
- Circuit Breakers[1]
- Steel Pipes[2]
- Steel Sheets[2]
- Steel Wire[4]
- Steel Angles[1]
- Steel Round Bars[2]
- Engines[10]
- Tractors[1]
- Tractor Truck[3]
- Dump Truck[4]
- Belt Buckles[6]
- Contact Person : Ms. Zhou Emily
- Company Name : Sun Hong Electrical and Mechanical Machinery Corporation Limited
- Tel : 86-731-85147908
- Fax : 86-731-85147918
- Address : Hunan,Changhsa,Room1812, Mingcheng Guo Ji, No.46, Rd.Renming(E), Changsha City, Prov. Hunan,China
- Country/Region : China
- Zip : 410016
WK-35 Electrical Shovel
WK-35 excavator is designed to match mining trucks with capacity of 172MT to 326MT
Technical characteristic:
·Gear-rack crowding, powerful penetration, high efficiency
·Gear transmission uses gears of high hardness surface to have long life;
·For swing and propel mechanism adopt planet reducer;
·Propel adopts high hand drive to prolong life time;
·Air release spring disk brakes are applied;
Working Ranges
1 | Max. digging radius | ~24.00 |
2 | Digging height at max. digging radius | ~11.30 |
3 | Max. height of cut | ~16.20 |
4 | Digging radius at max. digging height | ~22.85 |
5 | Floor level radius | ~15.80 |
6 | Max. dumping radius | ~20.90 |
7 | Dumping height at max. radius-door open | ~5.25 |
8 | Max. dumping height-door open | ~9.40 |
9 | Dumping radius at max. dumping height | ~18.40 |
10 | Depth of cut | ~1.75 |
Main Performance Parameter
1 | Dipper(material density is 1.8t/ m³) | 35m³ |
2 | Dipper capacity | 25-54 m³ |
3 | Max. hoist speed | 1.60m/s |
4 | Max. crowding speed | 0.65m/s |
5 | Max. propel speed | 1.08km/h |
6 | Max. hoist force | 2150kN |
7 | Max. crowding force | 850kN |
8 | Max. crawler dragging force | 4520kN |
9 | Max. gradeability (degree) | 13° |
10 | Bearing area-ground pressure(width of crawler shoes=1397mm) | 425kPa |
Bearing area-ground pressure(width of crawler shoes=1829mm) | 330kPa | |
11 | Working cycle time(=90°) | 30s |
12 | Working weight(width of crawler shoes=1397mm) | ~1065t |
Working weight(width of crawler shoes=1829mm) | ~1080t | |
13 | Counterweight | ~228t |
14 | Theoretical productivity | ~4200 m³/h |
General Dimensions
1 | Boom angle | 45° |
2 | Boom length | 17.68 |
3 | Diameter of boom top sheave | 2.44 |
4 | Effective dipper handle length | 10.36 |
5 | Clearance height of boom point sheave | 18.54 |
6 | Clearance radius of boom point sheave | 17.30 |
7 | Center of rotation to boom foot pin | 3.51 |
8 | Height-ground to boom foot pin | 4.75 |
9 | Radius of rear end | 9.95 |
10 | Width of cab | 9.40 |
11 | Height-ground to top of main cab | 8.35 |
12 | Height-ground to operator’s level | ~9.55 |
13 | Height-ground to bottom of counterweight | 2.70 |
14 | Overall length of crawlers | 10.80 |
15 | Overall width of crawlers(width of crawler shoes=1397mm) | 9.05 |
Overall width of crawlers(width of crawler shoes=1829mm) | 9.48 | |
16 | Width of crawler shoes | 1.397 1.829 |
17 | Height-ground to bottom of crawler drive device | 0.811 |
WK-35 Electrical Shovel
